|
|
|
|
|
|
| 型号︰ | MMCS/MSS6M |
| 品牌︰ | - |
| 原产地︰ | 美国 |
| 单价︰ | - |
| 最少订量︰ | - |
|
|
|
|
|
Material Characteristics
• Thin, flexible, high-loss, magnetically loaded, electrically non-conductive silicone rubber sheet
• Frequency range from 800 MHz to 18 GHz
• Service Temperature is 350 °F (177°C) continuous with short term exposures to higher temperatures
• Impervious to moisture and can be subjected to outdoor environments and high altitudes, including space, with no adverse effects
• Low out-gassing properties for space applications
• Can be cut and fitted to compound curves
Typical Properties
Attenuation, dB/cm
6.0 - 63.0
Volume Resistivity
2 x 108 ohm-cm
Relative Impedance
0.66 - 0.23
Dielectric Strength, volts/mil
>20
Nominal Thickness, inches (mm)
.040 (1.0)
Nominal Weight, lb/ft2 (kg/m2)
0.95 (4.6)
Hardness, Shore A
>80
Tensile Strength, psi
>500
Elongation, %
>20
Thermal Conductivity, (cal)(cm)/(sec)(cm2)(°C)
(BTU)(in)/(hr)(ft2)(°F)
0.0028
8.5
Fire Retardancy
UL-94 V1
%TML (with MSS-6M)
0.3 (0.23)
%CVCM (with MSS-6M)
0.05 (0.05)
Estimated weight with MSS-6M
0.9 Lbs. per sheet
Applications
MMCS is designed for the suppression of surface currents over a wide range of frequencies
• Useful for the suppression of creeping waves and reduction of cavity resonances in microwave modules.
MMCS is also useful in reducing RF coupling of antennas and microwave components
Availability
MMCS is available in sheets 0.040” x 12” x 12” (0.101cm x 30.5cm x 30.5cm)
• Upon special request, MMCS can be supplied in sheets up to 36” (914.4mm) in length
• It can be supplied with a Pressure Sensitive Adhesive (PSA). Product designation denoting MMCS with a PSA is MMCS/MSS-6M
M MCS is available in other sizes and customer specified configurations and thicknesses upon request
Instructions for Use
MMCS can be bonded to itself to make thicker sheets or to other substrates with either the factory installed PSA (MSS-6M), |
|
|
|
|
|
|
|
|
